BJBHD - LIQUID STRIP
- MSDS: BJBHD
- Manufacturer: VIVADENT USA INC
- Product Name: LIQUID STRIP
- National Stock Number: 6520-00F011161
Product Identification
Product ID:LIQUID STRIP
MSDS Date:03/09/1988
FSC:6520
NIIN:00F011161
MSDS Number: BJBHD
Responsible Party
TONAWANDA, NY 14150
Emergency Phone: (716) 694-2333
Info Phone: (716) 694-2333
Cage: 6S143
Contractor
Telephone: (716) 694-2333
Cage: 6S143
Ingredients
GLYCERIN
CAS: 56-81-5
RTECS: MA8050000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 (MIST) 9293
AMORPHOUS FUSED SILICA, SILICON DIOXIDE (SIO2), QUARTZ
CAS: 60676-86-0
RTECS: VV7320000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:LD50 ORAL (RAT): 12600 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IN THE FORM OF MIST,
GLYCERINE CAN ACT AS AN IRRITANT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IN THE FORM OF MIST, GLYCERINE CAN
ACT AS AN IRRITANT.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER & SEEK MED ATTN. INHALATION:
REMOVE TO FRESH AIR. INGESTION: IF LARGE AMOUNT, SEEK MEDICAL CARE.
SKIN: WASH W/WATER & SOAP.
Fire Fighting
Flash Point:320F
Extinguishing Media:WATER SPRAY, DRY CHEMICAL POWDER, ALCOHOL, &
POLYMER FOAM
Unusual Fire/Explosion Hazard:DANGEROUS WHEN EXPOSED TO HEAT, FLAMES, &
POWERFUL OXIDIZERS.
Accidental Release
Spill Release Procedures:ABSORB ON SAND OR VERMICULITE & PLACE IN
CLOSED CONTAINER FOR DISPOSAL. WASH SPILL SITE W/SOAP-SOLUTION.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE. DON'T
BREATHE VAPORS. KEEP TUBE CLOSED.
Exposure Controls
Eye Protection:RECOMMENDED
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:290C
Spec Gravity:1.26
Solubility in Water:SOLUBLE
Appearance and Odor:COLORLESS, VISCOUS LIQUID, SLIGHT SWEET TASTE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG BASES
Stability Condition to Avoid:HEAT, FLAMES, TEMPERATURES >140C
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT & BURN IN A CHEMICAL INCINERATOR.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.